/********************************************************************************

 **** Copyright (C), 2019, Fortior Technology Co., Ltd.                      ****

 ********************************************************************************
    File Name     : AMP.c
    Author        : Bruce HW&RD
    Date          : 2019-09-11
    Description   : .C file function description
    Version       : 1.0
    Function List :

    Record        :
    1.Date        : 2019-09-11
     Author      : Bruce HW&RD
     Modification: Created file

********************************************************************************/

#include "AMP.h"
#include "FU68xx_5_MCU.h"
#include "Customer.h"
#include <Myproject.h>
#if 0
void AMP_Init(void)
{
    #if (Shunt_Resistor_Mode == Single_Resistor)
    {
        /* ----AMP 端口模拟功能设置---- */
        #if (HW_AMP_MODE == AMP_NOMAL) //外部放大
        {
            SetBit(P3_AN, P31);             //AMP0 Pin设置为模拟模式  +
            SetBit(P3_AN, P30);             //AMP0 Pin设置为模拟模式  -
            SetBit(P2_AN, P27);             //AMP0 Pin设置为模拟模式  O
            SetBit(AMP_CR0, AMP0EN);        //AMP0 Enable
            
            ClrBit(AMP_CR1, AMP0_GAIN2);
            ClrBit(AMP_CR1, AMP0_GAIN1);
            ClrBit(AMP_CR1, AMP0_GAIN0);
        }
        #else
        {
            SetBit(P3_AN, P31);             //AMP0 Pin设置为模拟模式  +
            SetBit(P3_AN, P30);             //AMP0 Pin设置为模拟模式  -
            SetBit(P2_AN, P27);             //AMP0 Pin设置为模拟模式  O
        
            ClrBit(AMP_CR0, AMP0M_GND);     // 禁止运放反向输入端内部接地
            SetBit(AMP_CR0, AMP0EN);        //AMP0 Enable
        
            #if (HW_AMPGAIN == AMP2x)
            {
                ClrBit(AMP_CR1, AMP0_GAIN2);
                ClrBit(AMP_CR1, AMP0_GAIN1);
                SetBit(AMP_CR1, AMP0_GAIN0);
            }
            #elif (HW_AMPGAIN == AMP4x)
            {
                ClrBit(AMP_CR1, AMP0_GAIN2);
                SetBit(AMP_CR1, AMP0_GAIN1);
                ClrBit(AMP_CR1, AMP0_GAIN0);
            }
            #elif (HW_AMPGAIN == AMP8x)
            {
                ClrBit(AMP_CR1, AMP0_GAIN2);
                SetBit(AMP_CR1, AMP0_GAIN1);
                SetBit(AMP_CR1, AMP0_GAIN0);
            }
            #elif (HW_AMPGAIN == AMP16x)
            {
                SetBit(AMP_CR1, AMP0_GAIN2);
                ClrBit(AMP_CR1, AMP0_GAIN1);
                ClrBit(AMP_CR1, AMP0_GAIN0);
            }
            #endif
        }
        #endif
    }
    #else
    {
        SetBit(P1_AN, P16);             //AMP1 Pin设置为模拟模式  +
        SetBit(P1_AN, P17);             //AMP1 Pin设置为模拟模式  -
        SetBit(P2_AN, P20);             //AMP1 Pin设置为模拟模式  O
    
        SetBit(P2_AN, P21);             //AMP2 Pin设置为模拟模式  +
        SetBit(P2_AN, P22);             //AMP2 Pin设置为模拟模式  -
        SetBit(P2_AN, P23);             //AMP2 Pin设置为模拟模式  O
        ClrBit(P2_OE, P23);             //P23_OE需要强制为0，禁止DA1输出至PAD
    
        SetBit(P3_AN, P31);             //AMP0 Pin设置为模拟模式  +
        SetBit(P3_AN, P30);             //AMP0 Pin设置为模拟模式  -
        SetBit(P2_AN, P27);             //AMP0 Pin设置为模拟模式  O
        SetBit(AMP_CR0, AMP0EN);         //AMP0 Enable
        SetBit(AMP_CR0, AMP1EN);         //AMP1 Enable
        SetBit(AMP_CR0, AMP2EN);         //AMP2 Enable
    
        #if (HW_AMP_MODE == AMP_NOMAL)      //外部放大
        {
            ClrBit(AMP_CR1, AMP0_GAIN2);
            ClrBit(AMP_CR1, AMP0_GAIN1);
            ClrBit(AMP_CR1, AMP0_GAIN0);
    
            ClrBit(AMP_CR1, AMP_PH_GAIN2);
            ClrBit(AMP_CR1, AMP_PH_GAIN1);
            ClrBit(AMP_CR1, AMP_PH_GAIN0);
        }
        #else
        {
            #if (HW_AMPGAIN == AMP2x)
            {
                ClrBit(AMP_CR1, AMP0_GAIN2);
                ClrBit(AMP_CR1, AMP0_GAIN1);
                SetBit(AMP_CR1, AMP0_GAIN0);
    
                ClrBit(AMP_CR1, AMP_PH_GAIN2);
                ClrBit(AMP_CR1, AMP_PH_GAIN1);
                SetBit(AMP_CR1, AMP_PH_GAIN0);
            }
            #elif (HW_AMPGAIN == AMP4x)
            {
                ClrBit(AMP_CR1, AMP0_GAIN2);
                SetBit(AMP_CR1, AMP0_GAIN1);
                ClrBit(AMP_CR1, AMP0_GAIN0);
    
                ClrBit(AMP_CR1, AMP_PH_GAIN2);
                SetBit(AMP_CR1, AMP_PH_GAIN1);
                ClrBit(AMP_CR1, AMP_PH_GAIN0);
            }
            #elif (HW_AMPGAIN == AMP8x)
            {
                ClrBit(AMP_CR1, AMP0_GAIN2);
                SetBit(AMP_CR1, AMP0_GAIN1);
                SetBit(AMP_CR1, AMP0_GAIN0);
    
                ClrBit(AMP_CR1, AMP_PH_GAIN2);
                SetBit(AMP_CR1, AMP_PH_GAIN1);
                SetBit(AMP_CR1, AMP_PH_GAIN0);
            }
            #elif (HW_AMPGAIN == AMP16x)
            {
                SetBit(AMP_CR1, AMP0_GAIN2);
                ClrBit(AMP_CR1, AMP0_GAIN1);
                ClrBit(AMP_CR1, AMP0_GAIN0);
    
                SetBit(AMP_CR1, AMP_PH_GAIN2);
                ClrBit(AMP_CR1, AMP_PH_GAIN1);
                ClrBit(AMP_CR1, AMP_PH_GAIN0);
            }
            #endif
        }
        #endif
    }
    #endif
}